深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

How PPTC Resettable Fuses Work in a Circuit

Electrical appliances surround us in daily life, and almost every one of them relies on a fuse for protection. The most widely used type today is the resettable fuse. This article explains how a PPTC resettable fuse behaves inside a circuit.
 
A conventional fuse opens once when it clears an overcurrent and then has to be replaced. That is inconvenient. A PPTC resettable fuse combines overcurrent protection with automatic recovery.
 
The device is connected in series with the load. Under normal conditions it stays at low resistance so the circuit works as designed. When a short circuit or a surge drives a large current through it, the element heats up, its resistance rises, and the current is limited to a safe level.
 
Once the fault is removed, the device cools and returns to its low-resistance state by itself. The circuit resumes normal operation. Compared with a one-time fuse this avoids replacement, and it also avoids the repeated open-close cycling that can damage downstream components.
 
The dual function comes from the construction. A PPTC device is made from a polymer mixed with conductive particles. Under normal conditions the particles form a three-dimensional conductive path through the polymer and resistance is low. On a surge or an abnormal current the temperature rises quickly, the polymer expands, the conductive path breaks, resistance increases sharply and the current falls. Electrically the circuit behaves as if it were open, which is what protects the load.
 
When the surge or abnormal current disappears, the device no longer generates enough heat to hold the high-resistance state, and resistance returns to its original low value.
 
Compared with a conventional fuse, a PPTC resettable fuse resets itself, takes up less space and withstands mechanical stress better.