深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

PPTC vs. CPTC: What's the Difference

First, everyone knows what PPTC is. By habit we call PPTC a resettable fuse, but strictly speaking PPTC is not a resettable fuse; the proper name for that product is Resettable Fuse. Some people also use PPTC as a name for a PolySwitch polymer switch.
 
 
PPTC is the abbreviation of Polymer Positive Temperature Coefficient, that is, a polymer positive temperature coefficient thermistor. Its opposite is the NTC, or Negative Temperature Coefficient, thermistor.
 
 
In the domestic electronics industry the name PPTC is also used for battery over-current protection strips: the part looks like a thin rectangular piece of chewing gum, with a nickel tab welded on each side and a polymer structure in the middle.
 
 
From the explanation above it is clear that the many different names used for these parts — resettable fuse, over-current protection strip, polymer switch, thermal switch and so on — all in fact mean a PTC device. (Related reading: Technical terminology for PTC positive temperature coefficient thermistor products)
 
 
PTC devices fall into two groups: the polymer type (PPTC) and the ceramic type (CPTC). They differ in initial resistance, trip time (how fast they respond to a fault) and physical size. What they have in common is the ability to hold a current. On the other hand, the polymer PTC thermistor, or PPTC, is smaller, has a lower resistance and responds faster than the ceramic PTC thermistor, or CPTC.
 
 
We hope this introduction has given you a clearer understanding of PPTC and CPTC. This article is presented by Shenzhen Joincircuit Industrial Co., Ltd.; for more information please browse the other pages of our website or contact our online sales staff. (Recommended reading: Maximum operating voltage of PPTC resettable fuses)