深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

PPTC Overview

We habitually call PPTC a resettable fuse. Strictly speaking, PPTC is not a resettable fuse, but whenever PPTC is mentioned today people assume a resettable fuse is meant, so to a large extent PPTC has become shorthand for the resettable fuse.
 
 
PPTC stands for Polymeric Positive Temperature Coefficient, that is, a polymer positive temperature coefficient thermistor. It is also known as a resettable fuse (Resettable Fuse), and in China's electronics industry it is usually called a resettable fuse or over-current protection sheet. (Related reading: PPTC vs. CPTC: What's the Difference)
 
 
A PPTC consists of conductive particles and a polymer. The electrodes are made of conductive metal and encapsulated in plastic film or resin.
 
 
How it works: under normal conditions the conductive particles in the polymer form conductive paths. When an over-current or over-temperature fault occurs, the PPTC heats up quickly; on reaching the Curie point it expands sharply, breaking the conductive paths formed by most of the particles, so the circuit becomes almost open and only a very small current flows, which keeps the PPTC in the tripped state. Once the fault is removed and the circuit is opened, the PPTC (resettable fuse) cools down, the conductive particles inside it re-form conductive paths and the circuit returns to normal.
 
 
Selection: first establish the maximum ambient temperature at which the protected circuit operates normally, together with the operating current, the maximum working voltage, the required protection current and the trip time. Choose a radial leaded (DIP) or surface-mount (SMD) PPTC according to the characteristics of the circuit or product. Select a product series whose voltage rating is equal to or higher than the maximum working voltage. Using the maximum ambient temperature and the operating current, read the PPTC temperature derating curve to choose the hold current (Ihold) that suits the application. Then check the trip-time curve of that part number (available in the datasheets on the Joincircuit website, or ask our sales team) to confirm that the part meets the required protection time.
 
 
Finally, compare the dimensions given in the datasheet to confirm that the package size of the selected PPTC meets your requirements.
 
 
This is our detailed introduction to the PPTC. If anything else is unclear, read the other articles on this site or ask our online sales staff directly. (Recommended reading: Maximum Operating Voltage of PPTC Resettable Fuses)