深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

Why Fuses Often Blow at Switch-On or When Power Is First Applied

In everyday life we all run into the same thing: the moment a switch is flipped, the lamp flashes with a bang and dies, and the usual fix is a new bulb. Many appliances behave the same way. What is actually going on? Let us answer the question point by point.
 
 
First, the sudden loss of power or the lamp going out is simply a blown fuse inside the appliance, which leaves the appliance unusable and means the bulb has to be replaced. So why does the fuse so often blow at switch-on or the instant power is applied?
 
 
A specialist at Shenzhen Joincircuit Industrial Co., Ltd. explains: most circuits draw a momentary inrush current when power is first applied, and in capacitive or inductive circuits that surge can be many times, even tens of times, the normal steady-state current. If the fuse used in the circuit cannot withstand enough surge energy, the surge will blow it. (Related reading: understanding the rated voltage of a fuse)
 
 
If the inrush current lasts only briefly and the energy it releases is not enough to blow the fuse, the fuse will not open; it is merely damaged to some degree and only fails after a certain number of such surges. This is why many household appliances suddenly give out after a period of use.
 
 
Something similar happens with connectors: hot-plugging some of them while the equipment is running also produces a large current pulse, and a fuse without sufficient pulse withstand capability will likewise be blown by those pulses.
 
 
The specialist continues: to stop a fuse from being blown by surge or pulse currents, the right type of fuse has to be selected. Judging by the surges or pulses the protected circuit is likely to see, choose a suitable fuse family, for example a surge-resistant fuse or a time-lag fuse.
 
 
The I2t melting energy rating of a fuse expresses its ability to withstand surges, and the melting energy of a time-lag fuse is many times that of a fast-acting fuse of the same rating.
 
 
So the quality of an appliance often comes down to the quality of its fuse. A thousand-mile dyke can be brought down by an ant hole, and no small detail should be ignored: only a correctly chosen fuse lets equipment run longer, and that is what makes it safer. (Recommended reading: why a surface-mount fuse sometimes has a high resistance without opening)
 

上一条:已经是第一条了!

下一条:自恢复保险丝为什么用高分子材料制作?