深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

How a Fuse's Rated Current Relates to Its Fusing Current

What is the relationship between the rated current and the fusing current of a fuse? This question comes up often, so today we will explain the two together, starting from the standard definitions.
 
 
Rated current is the current an electrical load draws when it runs at its rated voltage and rated power. For electrical equipment, the rated current is the current permitted during continuous long-term operation under the rated ambient conditions (ambient temperature, solar radiation, altitude, mounting conditions and so on). In service the current of an appliance must not exceed its rated current. (Related reading: Is a Fuse the Same as a Fuse-Link?)
 
 
Fusing current (expressed in mA, A and so on) is the maximum current a conductor can carry before it melts. As the resistance of the conductor rises, the fusing current falls. For a given cross-sectional area, a longer conductor has a higher resistance and therefore a lower fusing current.
 
 
Normally, for any given fuse, the rated current is lower than the fusing current: the fusing current is 1.1 to 1.3 times the rated current. The rated current is the maximum current of the circuit in which the fuse is used. If, for example, the circuit allows a maximum current of 10 A, a suitable fuse will have a rated current of 10 A. The fusing current is the value above which the current through the fuse will melt it and so protect the circuit.
 
 
Rated current and fusing current are different concepts and cannot be equated. The rated current should be treated only as a nominal rating. How much current a fuse can actually carry before it blows is laid down in detail in the relevant fuse product standards, and the requirements differ from one standard to another. A fuse has a "fusing factor" greater than "1" (typically between 1.1 and 1.5), which is the ratio of the "conventional non-fusing current" to the "rated current". It follows that even when the current through a fuse exceeds its rated current but stays below the conventional non-fusing current, the fuse should not blow.
 
 
That is a detailed explanation of the rated current and the fusing current of a fuse. If anything is still unclear, look through the other pages of our site for the answer you need, or contact our online sales team, who will be glad to help. Customers are welcome to call us to request samples. (Recommended reading: Common Parameters of Surface-Mount Fuses Explained)

上一条:已经是第一条了!

下一条:自恢复保险丝为什么用高分子材料制作?