Every product comes with its own precautions. Ignoring them can affect performance and lead to equipment failure, so when we buy a product we should always keep the relevant influences in mind. So how exactly does ambient temperature affect fuse performance? This article explains.
A fuse works by operating when an overcurrent appears in the circuit, protecting the equipment from damage. When the fuse operates, the heat converted from electrical energy raises the temperature of the fuse element above ambient, while the fuse also dissipates heat through its connections. Once the operating current returns to normal, heating and dissipation balance and the fuse element temperature settles at a steady level. If a fault occurs, the current rises and more heat is generated, so the fuse element temperature keeps climbing until it reaches the melting point of the element material and the melting process begins. At that point the fuse opens and can no longer provide protection.
From the process above we can see that under overload the real reason a fuse operates is the heat generated by the overcurrent. Since the operation of a fuse is caused directly by heat, ambient temperature certainly affects it. (Related reading: What Is the Significance of Studying Fuse Temperature Rise)
Usually, ambient temperature means the temperature of the small environment around the fuse inside the equipment while it is running. There are exceptions: some people take it to mean the indoor or outdoor temperature around the electrical equipment, but the local temperature inside the enclosure has the greater effect, because it acts more directly on the fuse. Atmospheric temperature rarely exceeds 50 °C, whereas the temperature inside an enclosure may even exceed 100 °C, which strongly affects fuse performance.
The higher the ambient temperature, the faster the fuse opens, which in effect lowers its rating. Because fuse performance depends on the operating temperature, the actual working temperature must be taken into account when selecting a fuse. Fuse manufacturers should supply derating curves for high-temperature operation, which tell customers by what percentage the rated current is derated at a given temperature.