深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

Same Rated Current, Different Brand Fuses

In everyday life we often come across a question: for identical things from different brands, some are interchangeable. Is the same true of fuses? Can fuses with the same rated current from different brands always be swapped directly? Let us analyse the question together.
 
 
First, a fuse normally has two roles in a circuit. The first is to operate within a certain time when a fault current is present, protecting the circuit and people's safety. The second is that, while the fuse is protecting the circuit, transient non-fault overcurrents in the circuit must not make it operate at will; continuous normal operation is achieved by choosing a fuse with suitable melting characteristics and a suitable rated current. (Related reading: Overcurrent Protection with PPTC Resettable Fuses in Noodle Machines)
 
 
Second, when many buyers choose a fuse, they rely on the technical data provided by the fuse manufacturer, such as the “time-current characteristic curve” and the “time-energy characteristic curve”, to select the right specification.
 
 
As we know, the melting characteristic and the rated current of a fuse are only labels; they do not necessarily reflect the actual melting current, melting energy and melting time, and there are differences between brands. Brand A may be slightly faster than brand B, but it will certainly be slower than brand A's own fast-acting products. Although the industry has its basic knowledge and commonly accepted standards, the data ranges allowed by those standards are very wide. In the example above, brand A lies near the lower limit of the standard while brand B lies near the upper limit; both comply, yet a difference remains.
 
 
So when choosing a replacement fuse, we should not only confirm the rated current but also check other properties on the characteristic curves to see how large the differences are, avoiding errors and losses caused by performance differences. Replacing a fuse merely because the rated current is the same can easily lead to abnormal blowing and a machine that will not work, and the latter is the more likely outcome.
 
 
In summary, fuses with the same rated current from different brands are not necessarily interchangeable. For the safety of the circuit we should choose a replacement whose parameters are close and whose differences are small, and before replacing we must confirm the requirements for every parameter. (Recommended reading: 1210 Series SMD PPTC Resettable Fuses Direct from the Manufacturer)
 

上一条:已经是第一条了!

下一条:自恢复保险丝为什么用高分子材料制作?