In the electronics industry a fuse is small, yet it is a fairly important component, and fuse selection is one of the key factors in how well a product performs. So how should a fuse be chosen, and what kind of fuse can be called a good fuse? Today we will explain what makes a good fuse.
In one sentence: it must open when it should open, must not open when it should not, and must do so safely. The job of a fuse is protection, so it has to protect when protection is needed; this is the most basic requirement for a fuse. (Related reading: Effect of Ambient Temperature on Fuse Performance)
Generally, the rated current of a fuse should be higher than the normal operating current in the circuit and should provide a certain overload capability. That capability must be appropriate and must not be too large; otherwise the protection function of the fuse is reduced or weakened, it fails to operate when it should, and the protected components may be damaged or worse. The rated current of a fuse must therefore be selected with care.
When selecting a fuse, engineers usually refer to the time-current characteristic curve in the datasheet supplied by the fuse manufacturer. Because the curve is plotted under normal atmospheric conditions, the working environment around the product should be taken into account, and a fuse with a suitable melting characteristic and a suitable rated current should be chosen so that it provides protection.
Second, a fuse has a carrying capability, that is, a pulse withstand capability, which we call the melting energy value I2t. As long as the I2t of the fuse is greater than the pulse energy in the circuit, the fuse will withstand it. The “time versus melting energy curve” is a reference figure provided to buyers and engineers. Going further, every pulse the fuse withstands does it some damage, and I2t is reduced, that is, the pulse withstand capability falls. This degradation must be considered when selecting a fuse; a simple rule of thumb is to allow a margin of 3 to 5 times so that the fuse has sufficient pulse withstand capability.
The pulse withstand capability of a fuse and its protective performance are in conflict, and a reasonable balance must be found between the two, at the best point of compromise. Only a fuse type and rating with an appropriate melting energy value, together with a sufficient and reasonable safety margin, can meet the carrying (pulse withstand) requirement. Safety must also be assured, that is, safe conduction and safe clearing. The main technical parameter that guarantees this for a fuse is the breaking capacity.
As described earlier, the breaking capacity has been outlined in some detail, so a fuse type with a sufficient breaking capacity and rated voltage, and with the safety approvals required for the region of use, is needed to meet the safety function of the fuse. In summary, a suitable melting characteristic and rated current, a sufficient and reasonable melting energy value, and a suitable breaking capacity, rated voltage and safety approvals are the conditions necessary for a fuse to perform its main function. Only when these three conditions are met, and the conflict between protective performance and pulse withstand capability is balanced in the most reasonable way, can we judge that a fuse is of good quality and reliable. (Recommended reading: How to Understand the Melting Characteristics of a Fuse)