深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

How to Explain the Difference Between FA, HI and SB in Plain Terms

In many cases we come across shorthand such as FA-HI-SB, so what exactly is the difference between these designations? Let's break them down one by one.
 
 
First, let's clarify what each abbreviation means. FA stands for Fast Acting, a fuse with a fast interruption characteristic; HI stands for High Inrush, a fuse that withstands high pulses; SB stands for Slow Blow, a fuse with a time-lag interruption characteristic.
 
 
In plain terms, FA is like a plastic bag with a certain capacity: once it is full of air it cannot take any more, or it bursts. HI is like a small balloon with a larger capacity that keeps expanding and withstands a certain pressure, but still bursts when the pressure finally gets too high. SB is like a large balloon with a very large capacity: it takes an even higher pressure than HI and only bursts after a certain amount of air has gone in.(Related reading: Are time-lag fuses better than fast-acting fuses?)
 
 
From the analysis above we can see that the biggest difference between the three lies in the energy level, that is, how much pulse current they can withstand. The air pressure mentioned above can also be understood as pulse current.
 
 
That is a brief explanation of the difference between FA, HI and SB. If you still have questions, please contact our online sales staff, or send us an email from the Contact Us page and we will reply as soon as possible. (Recommended reading: Overcurrent protection of rolling shutter motors with resettable overcurrent protectors)

上一条:已经是第一条了!

下一条:自恢复保险丝为什么用高分子材料制作?