深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

Overcurrent Protection Devices for LED Lighting: Key Application Points

From the kerosene lamps of the 1970s and 1980s and Edison's light bulb to today's LED lighting, LEDs have been enthusiastically adopted. Compared with kerosene lamps they are more convenient and light a wider area, and they combine low power consumption, long life and environmental friendliness.
 
 
Once LEDs became widely known, designers and engineers developed many new functions for them. Having spread from small-size backlights into large-panel backlighting, they have expanded further into general illumination and are now growing quickly in landscape, architectural, commercial, automotive and mobile lighting. (Related reading: How can small and medium-sized LED companies expand their scale again)
 
 
Because the market has yet to form a unified standard, the many application areas of LED lighting inevitably bring a wide variety of drive solutions, but whatever the variation, the problem is always solved from the angle of overcurrent protection. By the input current of the lamp, LEDs fall into two groups: DC input and AC input. The main difference between the two is whether the driver supply contains an AC-to-DC conversion stage.
 
 
Overcurrent protection for LED lighting serves three main purposes:
 
 
First, protecting personal safety. The input voltage of an LED circuit is generally fairly high, so overcurrent protection is applied to the LED.
 
 
Second, isolating the subsystem from the outside system. If a component inside a circuit subsystem fails and creates a short-circuit condition, or if an unsafe external factor damages insulation that was originally sound and causes a short circuit, and the subsystem is at that point neither isolated from the outside system nor protected in time, the fuse of the external system will operate and interrupt the entire power supply. Such incidents cause unexpected losses in critical locations such as hospitals, and may even cause casualties, which is why two fuses are sometimes added at the power input.
 
 
Third, protecting important and costly electronic components. In an LED luminaire the LED packages account for most of the cost of the whole fixture, so in non-isolated or non-constant-current drive circuits the driver output needs appropriate overcurrent protection.
 
 
That is our summary of the key points for applying overcurrent protection devices in LED lighting. If anything is still unclear, leave a message for us on the contact page and we will reply as soon as possible. (Recommended reading: Overcurrent and overvoltage protection for LED backlight power interfaces)