In the protection of electronic components, resettable fuses are widely used; for lightning and surge protection, however, gas discharge tubes and TVS diodes are the more common choice. Today our editors give a brief introduction to TVS technology.
TVS stands for transient voltage suppressor, a high-efficiency protection device in diode form. It responds extremely fast (nanosecond level), although its surge withstand capability is somewhat lower than that of gas discharge tubes and varistors. Its 10/1000 µs pulse power ranges from 400 W to 30 kW and its peak pulse current from 0.52 A to 544 A; breakdown voltage is available in a series of values from 6.8 V to 550 V, which suits circuits operating at many different voltages. (Related reading: 7.5*11.5 mm three-electrode surge arrester, 10 kA ceramic gas discharge tube, JTA37H series)
When a reverse transient high-energy surge strikes across the two terminals of a TVS diode, the device switches the high-impedance state between its terminals to a low-impedance state within roughly 10^-12 s, absorbs surge power of up to several kilowatts and clamps the voltage across the terminals to a predetermined value, effectively protecting precision components in electronic equipment from a variety of surge pulses. From this operating behaviour it is clear that TVS diodes offer fast response, high transient power handling, low leakage current, easily controlled clamping voltage, small size, no wear-out limit and tight breakdown voltage tolerance.
It is precisely because transient voltage suppressor diodes have these characteristics that they are used so widely: common-mode and differential-mode protection, suppression of motor electromagnetic interference, protection of GPS, CDMA and GSM equipment and digital cameras, RS232/422/423/485 interfaces, I/O, LAN, computer systems, communication equipment, AC and DC power supplies, automotive electronics, electronic ballasts, household appliances, instruments and meters (electricity meters), industrial control loops, and suppression of relay and contactor noise, among many other fields.
That is the TVS knowledge our editors have put together. If anything is still unclear, leave a message for our editors on the Contact Us page, ask our online sales staff directly, or read other articles on this site for a more detailed explanation. (Recommended reading: Overcurrent protection for power banks with resettable fuses)