深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

What Types of Varistors Are There? Functions and Working Principle

Strictly speaking, a varistor is a semiconductor device. It can be classified by construction, manufacturing process, voltage-current characteristic and material. Its main job is to protect circuits against overvoltage, and it is widely used for lightning and surge protection, which makes it an overvoltage protection component.
 
 
By construction there are four types: junction varistors, bulk varistors, single-grain-layer varistors and thin-film varistors. The junction type achieves its non-linear characteristic through the special contact between the resistive body and the metal electrode, while the bulk type relies on the semiconductor properties of the resistive body itself. (Related reading: What is a varistor and how does it work)
 
 
By material there are five main groups: zinc oxide varistors, silicon carbide varistors, metal oxide varistors, germanium (silicon) varistors and barium titanate varistors. Each group is named after the material that forms the resistive element, and the zinc oxide varistor is the type most widely used.
 


 
Varistor
 
By voltage-current characteristic, varistors are divided into symmetrical (non-polarised) and asymmetrical (polarised) types.
 
 
Varistors are widely used in electronic circuits, mainly to prevent damage caused by sudden changes in the supply voltage. When a high voltage appears in the circuit, the resistance of the varistor drops and diverts the current, so the circuit is spared damage or disturbance from excessive transient voltage and sensitive electronic components are protected.
 
 
A varistor's voltage protection is limited, however: it cannot provide complete protection for every voltage, because the energy or power it can absorb is finite. It cannot provide continuous overvoltage protection, otherwise the varistor itself would be damaged, the equipment would suffer and there could even be a fire hazard. Conditions such as the inrush current at power-up, the overcurrent of a short circuit or a sudden voltage drop also cannot be handled by a varistor and call for other forms of protection.
 
 
The types, functions and working principle of varistors have been covered above. Readers who would like to learn more are welcome to browse our other articles or leave a message for us on the Contact Us page, and we will reply as soon as possible. (Recommended reading: How to Select Overcurrent Protection Devices for LEDs with Different Current Input Types)

上一条:已经是第一条了!

下一条:自恢复保险丝为什么用高分子材料制作?