Fuses are everywhere in daily applications, especially in electronics, yet what people know about them often stays hazy. The relationship between fuse materials and fuse melting has long puzzled readers. Today we will walk through how the two are related.
As noted above, fuse materials are mainly low-melting-point alloys such as lead-antimony alloy. Copper wire must never be used in place of a fuse. Solder wire, a lead-tin alloy that is mostly tin and may even contain no lead, can serve as a fuse, but it costs more, melts at a low temperature, and its melting-current ratings have to be established by experiment. A fuse element is essentially lead: it cannot serve as solder, it has a high melting point, it oxidizes easily, and it has no affinity for other metals. (Related reading: How to Select a Fuse, and What to Watch For in Fuse Selection)
Fuses and lead-tin solder wire can substitute for each other, but only as a temporary fix; a complete substitution is another matter. Differences in material, melting point and surface finish all lead to differences in protection performance. Solder wire is hollow-cored and premium grades contain silver, whereas a fuse element has a high melting point and a dull surface.
Fuse
A fuse is a wire made of lead-antimony alloy with relatively high resistivity and a relatively low melting point. In everyday use it is simply called a fuse, and IEC 127 defines it as a "fuse element". It is a component installed in a circuit to keep that circuit running safely.
Soldering means attaching molten solder to the surface of a thoroughly clean metal workpiece; the tin in the solder then forms a metallic compound with the workpiece metal so that the two are joined. Tin has a stronger affinity for other metals than lead does and readily forms compounds at low temperature. In short, soldering joins metal A to metal B by using solder as the medium together with heat.
In summary, a fuse element cannot be used as solder wire, although solder wire can occasionally stand in for a fuse element. That is the difference between fuse materials and fuse melting. If you have further questions, leave us a message on the contact page and we will reply as soon as possible. (Recommended reading: 16V leaded resettable fuse, A16 UL certified)