深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

How to Choose the Right Fuse for Your Circuit

Selection is one of the more important tasks in the fuse industry: only the right fuse model lets a product deliver its full value and keeps quality assured. So how should a fuse be chosen correctly? This article gives a brief overview.
 
 
First, the following factors should be considered in the preliminary selection:
 
 
1. Rated current, AC or DC. When selecting a fuse, the rated current should be slightly higher than the rated current of the product in the circuit, so that the fuse can provide protection. If the rating is too low, the fuse cannot protect the circuit in time; if it is too high, the product may burn out, and protection is again lost. (Related reading: Why the fuse matters in a circuit and what it is there for)
 
 
2. Rated voltage, that is the maximum voltage. As a rule, the fuse voltage is chosen 1.5 or 3 times the product voltage.
 
 
3. Fusing current for protection. Consider the longest time for which the maximum current can persist.
 
 
4. Ambient temperature in which the product operates. The parameters of a fuse are normally measured at a constant 25 °C. The current a fuse can carry falls as ambient temperature rises, so the operating temperature of the product must be fully taken into account when choosing a fuse.
 
 
5. Inrush current frequency. This affects the service life of the fuse itself, so it also deserves attention during selection.
 
 
6. Installation space and mounting requirements. The available space determines which fuse can be used; fuses are available in leaded, SMD and ceramic types. Where space is tight, a small-size fuse is required, usually an SMD fuse. (Recommended reading: How fuse holders are classified and which types are available)
 
 
That is the fuse selection guidance compiled by Shenzhen Joincircuit Industrial Co., Ltd. If you have further suggestions, email us or leave a message on our contact page and we will reply as soon as possible.

上一条:已经是第一条了!

下一条:自恢复保险丝为什么用高分子材料制作?