深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

Resettable Fuses in Electronic Devices

As electronics technology advances, portable electronic devices such as cellular phones, PDAs and laptop computers have grown increasingly popular. These devices, however, place specific overcurrent protection demands on their power supplies, which makes component selection critical. After extensive testing, engineers settled on the resettable fuse as the overcurrent protection device for those supplies. The following sections outline how resettable fuses are applied in electronic equipment.
 
 
These devices are usually powered or charged through an AC/DC power adapter, which converts mains power or unregulated DC into a suitable low-voltage DC rail. As more and more users buy adapters and universal chargers from the parts market, the chance of an incompatible or faulty adapter being plugged into a portable device rises accordingly. (Related reading: What to Consider When Installing a Resettable Fuse)
 
 
The voltage, polarity and current of an adapter may all fail to match the circuit specification of the device, which causes damage and even creates a safety hazard. Small fuses are therefore widely used in this market, and the arrival of the new micro series has removed package size as a constraint on resettable circuit protection. Because most faults in these devices are transient by nature, resettable protection also spares manufacturers the high cost of replacing a whole unit over a minor fault.
 
Electronic equipment
 
Electronic equipment
 
 
Placing a polymer positive temperature coefficient (PPTC) device in series with the power input effectively prevents the overcurrent damage that an incompatible adapter can cause. Adding a few components in parallel, such as a Zener diode, a transient voltage suppression diode or an arc suppression circuit, also provides overvoltage protection. Unregulated DC is converted by the adapter to the appropriate voltage for charging the battery pack. (Recommended reading: Problems Resettable Fuses Solve in Security Equipment, and Their Advantages)
 
 
Working with the overvoltage protection device, the PPTC performs the following tasks: it provides overcurrent protection against currents large enough to damage the FET or the battery pack; when polarity is reversed, the PPTC trips to limit the current produced by the forward-biased Zener diode; while the overvoltage device guards against voltage overload, the PPTC limits the conducting current to protect that device; and a PPTC resettable fuse can also sit at the battery pack connector to protect against overcurrent damage caused by a faulty or mismatched pack.
 
 
Protection at the battery pack output likewise works well when powering hands-free car kits or headsets.
 
 
This article has summarized the application of resettable fuses in electronic equipment. If anything remains unclear, leave a message on our Contact Us page and we will reply as soon as possible.