深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

Choose SMD Resettable Fuses Carefully

Technology advances quickly and its influence shows in every part of daily life. In electronic components in particular, miniaturization has become the inevitable direction of product development, so SMD resettable fuses have become common and are now widely used.
 
 
Nothing is perfect, however. Compared with the conventional leaded resettable fuse, the SMD resettable fuse has clear advantages and also some drawbacks. How to choose sensibly is the subject of this article.
 
 
1. Holding current: establish the normal operating current of the circuit, then choose the SMD resettable fuse of the matching rating.
 
 
2. Trip current: when selecting a part for the circuit to be protected, the Itrip of the SMD fuse must be less than or equal to the current at which the protected circuit requires protection.
SMD fuse
 
3. Trip time: some protected circuits must be protected within a given time at a given current, so check whether the response time of the fuse meets that requirement. (Related reading: What to Consider When Installing a Resettable Fuse)
 
 
4. Ambient temperature: every resettable fuse in a circuit is subject to a thermal derating, and the SMD fuse is no exception. The SMD resettable fuse must therefore be derated according to the ambient temperature and used below its rated level.
 
 
5. Package size: SMD fuses usually go into highly integrated products, so at the selection stage check whether the package can be mounted on the protected circuit board.
 
 
An SMD resettable fuse is a “double-edged sword”. How to “accentuate the strengths and avoid the weaknesses” and get the most out of it is perhaps already clear from the discussion above. Shenzhen Joincircuit Industrial Co., Ltd. reminds you to select carefully: circuit safety comes first. (Recommended reading: Resettable Fuses in Security Systems and the Features of Security Equipment)

上一条:已经是第一条了!

下一条:自恢复保险丝为什么用高分子材料制作?