深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

TVS Diode Applications and Common Parameters Explained

TVS diode is the short name for transient voltage suppression diode. In an earlier article we covered what a TVS is and how it works. Recently many readers have emailed us to ask about the scope of TVS applications and the meaning of some common parameters, so we answer them all here.
 
 
TVS devices are generally divided into bidirectional and unidirectional types: bidirectional TVS is normally used in AC circuits and unidirectional TVS in DC circuits. TVS is often used together with a resettable fuse to achieve better circuit protection, and it can guard against lightning surges, overvoltage, interference and surge power, which makes it an ideal protective device. Its withstand capability is expressed in watts (W). (Related reading: What is a transient voltage suppression diode (TVS))
 
 
TVS devices are used fairly widely today, typically in computer systems, communication equipment, AC and DC power supplies, automotive electronics, electronic ballasts, home appliances, instruments and meters (electricity meters), RS232/422/423/485, I/O, LAN, ISDN, ADSL, USB, MP3, PDAS, GPS, CDMA, GSM and digital cameras, and for common-mode and differential-mode protection, RF coupling and IC driver/receiver protection, motor EMI suppression, audio and video inputs, sensor and transducer interfaces and industrial control loops, as well as suppression of relay and contactor noise.
 
 
Some of the more common TVS parameters are the breakdown voltage V(BR) and the maximum reverse peak pulse current IPP. These two are the most widely used and the most important specifications of a TVS diode.
 
 
Breakdown voltage V(BR) is the voltage measured across the device in the breakdown region at the specified test current I(BR); in this region the diode becomes a low-impedance path.
 
 
The maximum reverse peak pulse current IPP is the highest peak pulse current the device is allowed to conduct in the reverse direction under the specified pulse conditions. The product of IPP and the maximum clamping voltage VC(MAX) is the maximum transient pulse power.
 
 
When selecting a TVS, make sure the rated transient pulse power PPR is greater than the maximum transient surge power that the protected device or line may see. (Recommended reading: TVS characteristics and the difference between unidirectional and bidirectional TVS)
 
 
The above is a brief summary of TVS applications and the meaning of the common parameters. If anything is still unclear, contact our online sales staff or leave a message for us on the Contact Us page and we will reply as soon as possible.

上一条:已经是第一条了!

下一条:自恢复保险丝为什么用高分子材料制作?