深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

Resettable Fuse Questions and Answers

A fuse enthusiast with the screen name “A Lone Traveler” sent an email asking: what should be noted when storing resettable fuses, and which factors affect the parameter values of the product?
 
 
A specialist at Shenzhen Joincircuit Industrial Co., Ltd. replied: storage of resettable fuses generally has no special requirements, and they can be kept long term using the normal practice for electronic components. In storage, avoid direct sunlight and excessive temperatures, which can affect certain performance characteristics of the product. (Related reading: what is the breaking capacity of a fuse, and how to choose a quality fuse)
 
 
A reader with the tail number “0581” called to ask: under what conditions does a resettable fuse reset automatically, and how long does automatic reset take?
 
 
The Joincircuit specialist answered: in general, once the overcurrent or overvoltage in the circuit returns to normal, the resettable fuse resets automatically to its original state. Reset usually takes less than a few minutes; in some cases the thermistor resets within seconds.
 
 
A reader with the screen name “I Love Fuses” emailed to ask: can resettable fuses be used in parallel? What about in series?
 
 
The Joincircuit specialist answered: resettable fuses may be connected in parallel in a circuit to lower the resistance and raise the hold current. It may also be connected in series, though this is rarely done, because one polymer PTC thermistor in the circuit will always trip first, after which the other devices provide no additional protection.
 
 
A customer with the QQ name “Water Purifier Manufacturer” sent a message asking: what is the failure mode of a polymer PTC thermistor, and how can it be identified?
 
 
The Joincircuit specialist replied: failure of a polymer PTC thermistor mainly appears as a large increase in room-temperature resistance, with the hold current dropping accordingly. A thermistor must meet two criteria before it can obtain UL certification: (1) it must interrupt the circuit 6000 times and still retain PTC behaviour; 2) it must remain in the tripped state for 1000 hours and still retain PTC behaviour.
 
 
This article has summarised some basic knowledge about resettable fuses and the classic questions people run into most often. If you have any other questions, please email us or send a QQ message and we will reply as soon as possible. (Recommended reading: how to select a fuse correctly)

上一条:已经是第一条了!

下一条:自恢复保险丝为什么用高分子材料制作?