As is well known, resettable fuses are normally connected in series in a circuit. A resettable fuse is an overcurrent electronic protection component made from a high-molecular organic polymer that is compounded with conductive particles under high pressure, high temperature and reaction conditions and then processed by a special process. Being maintenance-free, reusable, low in cost and reducing component count, it is widely used in circuits by engineers.
The action of a resettable fuse is a dynamic balance of energy: it responds quickly to abnormal current in order to protect the circuit. Under normal conditions the resettable fuse presents a low resistance. When an abnormal current (a short circuit) occurs, its resistance jumps from low to high within a certain time, blocking the abnormal current and protecting the following circuit from damage; at this moment almost the entire circuit voltage is applied across the resettable fuse.
Resettable fuse
At this moment the resistance of the resettable fuse itself becomes very high until the circuit is effectively open. Once the short-circuit point is removed and the current returns to normal (the fuse temperature drops to its normal value), the fuse recovers automatically, so it is not burned out at all; even if the plug is grounded, this fuse will not burn. (Related reading: resettable fuses in portable power tools)
Therefore, as the principle above shows, burnout of a resettable fuse is most likely caused by overvoltage or by quality problems. Some fuses are of poor quality to begin with: the electrode itself is not dense enough, so during lead soldering the rosin flux and a little solder penetrate between the electrode and the ceramic body, which reduces the bond strength between the electrode and the ceramic body.
Because the ceramic body, electrode, rosin and solder have different coefficients of expansion, stresses from the storage environment cause the epoxy encapsulation to crack and the electrode to separate from the ceramic body, resulting in damage. This affects the quality of the resettable fuse itself and can easily lead to burnout. (Recommended reading: resettable fuses in e-cigarettes)