深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

Fast-Acting vs Time-Lag Fuses Explained

Of the many things to know about fuses, fast-acting versus time-lag behaviour is probably what readers follow most closely, so how to tell the two apart has naturally become a focus of attention. Today we look at how to distinguish fast-acting from time-lag fuses and explain some of the basics of fuses in circuits.
 
 
Fuses generally carry their own specific attributes. By breaking speed, for example, they are marked with different letters: very time-lag (TT), time-lag (T), medium time-lag (M), fast-acting (F) and very fast-acting (FF). By international standard they are further divided into European-standard fuses (VDE), US-standard fuses (UL), Japanese-standard fuses (PSE) and so on.
 
 
In everyday applications we often meet surge or inrush current, where the current at the instant a circuit is switched on is several times its normal value. Although the peak is high, it lasts only briefly. An ordinary fuse cannot withstand such a current: with an ordinary fuse the circuit cannot start up normally, while a fuse with a larger current rating will not protect the circuit when an overload occurs. A time-lag fuse solves this problem well.
 
 
Time-lag fuses are made with a specially processed fuse element that absorbs energy; by adjusting how much energy it absorbs, the fuse can both ride out inrush current and still protect against overload. Standards specify the time-delay characteristics, and where the standard characteristic does not meet a requirement you can contact the manufacturer to resolve it.
 
 
The rated voltage should be equal to or greater than the effective circuit voltage, and the breaking capacity should exceed the maximum fault current in the circuit. Check whether a starting current exists when the equipment is switched on; in some circuits it is normal, and in those cases time-lag or medium time-lag tubular fuses should be used. The current the fuse must break, and for how long, is determined by the designer from the protection requirements of the particular circuit.
 
 
That covers some fuse basics and the questions around fast-acting and time-lag behaviour. If you have other questions, write to us and we will reply as soon as possible. (Recommended reading: Resettable fuse Q&A: answers to common questions)

上一条:已经是第一条了!

下一条:自恢复保险丝为什么用高分子材料制作?