深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

Why Resettable Fuses Burn or Catch Fire

As we know, a resettable fuse is an overcurrent protection component. Used improperly, or under certain conditions, it can ignite. So how do you avoid that, and what actually causes it? This article looks at the structure of the resettable fuse and the reasons it catches fire or burns out.
 
 
resettable fuseThe fuse element is made mainly of polyethylene mixed with carbon black. The carbon black conducts, while polyethylene itself is an insulator; once the carbon black reaches a certain proportion, its particles touch one another and form conductive paths through the polyethylene. For the moment we will call this mixture the fuse element.
 
 
Polyethylene (PE) is a thermoplastic resin produced by polymerising ethylene. One notable property is its large coefficient of thermal expansion: when heated, it expands.
 



 
Fuse burnout

 
When the current through the fuse element is too high, the polyethylene expands as it heats, and the carbon black particles are pulled apart. Resistance rises, the heat generated climbs sharply, and once no continuous path remains between the particles the conductive path is cut, current stops, and the fuse has done its job of opening the circuit. With no current flowing, the source of heat disappears, the polyethylene cools and contracts, resistance falls and conduction gradually returns. That is how a resettable fuse works.
 
 
From this mechanism it is clear that whenever current flows, the polyethylene expands thermally, and whether the circuit opens depends on whether that expansion can pull the carbon black particles far enough apart. If the polyethylene stays hot for a long time, its molecular structure or its properties can change, and that can interfere with the separation of the particles. What goes wrong most often in practice is local overheating caused by uneven distribution of carbon black: the higher mobility in the hot zone lets carbon black accumulate, which makes the distribution even more uneven. Once this vicious circle has run long enough, the fuse can no longer open, and the result is a burnout.
 
 
Most circuit designers understand how a resettable fuse works, so they know the risks and design around them. Some designs are careless enough to forget the countermeasure. What is it? The sound approach is to connect an ordinary fuse in series with the resettable fuse: if the resettable fuse fails, the ordinary fuse blows, preventing a fire in the resettable fuse from causing greater damage.
 
That covers what we wanted to explain about resettable fuses and the reasons they ignite or burn out. If anything is still unclear, leave a message for us on the Contact Us page and we will get back to you as soon as possible.

Related reading:
Common Mistakes in Fuse Selection

上一条:已经是第一条了!

下一条:自恢复保险丝为什么用高分子材料制作?