深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

Selecting a PTC Overcurrent Protection Device

The overcurrent protection device is abbreviated to PTC. It is made from a polymer base material compounded with a conductive filler. Some people also call it a resettable fuse, since terminology differs inside and outside the industry. So how do you choose the right PTC model? Here is a brief explanation.
 
 
Choosing the right overcurrent protection device has long been a headache for people in the industry. As industry has grown and production technology has advanced, the range of models has become larger and more complex, and for newcomers the choice can be genuinely difficult. So here is a plain-language summary. (Related reading: What Is a Fuse’s Breaking Capacity, and How to Choose a Good Fuse)
 
 
A transformer is not rated in power; when we talk about a transformer we normally mean its capacity. Today, however, fuses are rarely used: moulded-case circuit breakers in a plastic housing are the norm. If a fuse has to be used, choose a 400 V type; 400 V is equivalent to 380 V, and for a load of about 1.2 kVA a 5 A or 6 A fuse is sufficient, since a transformer can carry a moderate overload.
 
 
The terms overcurrent and overvoltage mean exactly that: excess current and excess voltage. Take a unit rated 10,000 kVA at 10,000 V, where the current is 1,000 A. Under an abnormal condition the current can reach 1,200 A but is allowed to persist for a defined time; protection against this is overcurrent protection.
 
 
For example, when the current reaches 1,200 A the breaker trips after a delay: a time-limited response of this kind is overcurrent protection. Overcurrent protection is divided into definite-time and inverse-time overcurrent protection. If a fault short-circuit current reaches the set value, 2,500 A say, the breaker trips instantly, which is called instantaneous tripping.
 
 
That is a brief analysis of how to select the right PTC overcurrent protection device model. If anything is still unclear, call us for advice or leave a message on our contact page, and we will give you a satisfactory answer as soon as possible. (Recommended reading: How to Select a Fuse Correctly)

上一条:已经是第一条了!

下一条:自恢复保险丝为什么用高分子材料制作?