深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

Glass Tube Fuse Response Time

What is the response time of a glass tube fuse? Several readers have emailed us with exactly this question, unsure how glass tube fuses behave, so this article answers it once for everyone.
 
 
As the name suggests, a glass tube fuse is a tubular fuse with a glass body. Most are marked with a designation built around the letters T or F, and those letters stand for different melting speeds. T is time-lag, F is fast-acting, TT is very time-lag, M is medium-acting and FF is very fast-acting. (Related reading: 6*30 mm fast-acting / time-lag cylindrical glass tube fuse, 0.5 A to 15 A, with leads)
 
 
What is the response time of a glass tube fuse? Melting time differs from fuse to fuse, and glass tube fuses are no exception: the melting time varies with the body material and with the fuse parameters. Fast-acting and time-lag types therefore respond at different speeds, typically anywhere from a few seconds to a few tens of seconds.
 
Glass tube fuse
 
Take a 3.75 A, 250 V fast-acting (F) fuse at its maximum output. The maximum current it will pass is 3.75 A, so the maximum load is 3.75*250, about 900 W; beyond that the fuse opens.
 
 
What is the response time of a glass tube fuse? We hope the explanation above has made the behaviour of these fuses clearer. If anything is still unclear, call us or leave a message on our Contact Us page and we will reply as soon as possible. (Recommended reading: 5*20 mm single fast-acting / time-lag glass current fuse tube)

上一条:已经是第一条了!

下一条:自恢复保险丝为什么用高分子材料制作?