深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

Common Thermistor Parameters Explained

Rated zero-power resistance R25: zero-power resistance is the resistance measured at a given temperature with so little power applied to the PTC thermistor that the change in resistance caused by that power is negligible. The rated zero-power resistance is the value measured at an ambient temperature of 25 °C.
 
 
Curie temperature Tc: for PTC thermistor applications the temperature at which resistance begins to rise steeply matters, and this is defined as the Curie temperature. At the Curie temperature the resistance of the PTC thermistor is RTc = 2 x Rmin. (Related reading: How polymer and ceramic thermistors differ from bimetal circuit breakers)
 
 
Temperature coefficient α: the temperature coefficient of a PTC thermistor is defined as the relative change in resistance caused by a change in temperature. The larger the coefficient, the more sensitive the thermistor is to temperature change. α = (lgR2 - lgR1) / lge(T2 - T1)
 
 
Rated voltage VN: the rated voltage is the supply voltage below the maximum operating voltage Vmax. Usually Vmax = VN + 15 [%]
 
 
Breakdown voltage VD: breakdown voltage is the highest voltage a PTC thermistor can withstand. Above the breakdown voltage the thermistor breaks down and fails. (See also: Which process steps improve the stability of NTC thermistors)
 
 
Surface temperature Tsurf: surface temperature Tsurf is the temperature of the PTC thermistor surface when the part has been held at the specified voltage and in thermal equilibrium with its surroundings for a long period.
 
 
Operating current Ik: a current through a PTC thermistor that is large enough for self-heating to raise its temperature above the Curie temperature is called the operating current. The lowest such current is the minimum operating current.
 
 
Non-operating current INk: a current through a PTC thermistor that is not large enough for self-heating to raise its temperature above the Curie temperature is called the non-operating current. The highest such current is the maximum non-operating current. (Recommended reading: Operating characteristics of polymer thermistors)

上一条:已经是第一条了!

下一条:自恢复保险丝为什么用高分子材料制作?