深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

How to Select a PTC Thermistor

Selecting a PTC thermistor for overcurrent protection means choosing a part that suits the ambient temperature, maximum working voltage, working current and protection current of the circuit or product being protected.
 
 
How is a thermistor selected? A PTC thermistor is an electronic overcurrent protection component. It is made of a high-molecular-weight organic polymer that, under high pressure, high temperature and vulcanization, is compounded with conductive particles and then processed by a special technique. PPTC devices are traditionally called resettable fuses. A PTC thermistor is mainly used to provide overcurrent protection in electrical appliances, so a resettable fuse is characterized by its voltage rating, current rating, holding current and trip time. Selection must therefore match the voltage, current and protection current of the product concerned. The procedure is as follows:
 
 
1. First determine the maximum ambient temperature at which the protected circuit works normally, together with its working current, maximum working voltage, required protection current and trip time.
 
 
2. Judging by the characteristics of the circuit or product, decide whether a leaded or an SMD PTC thermistor is suitable. (Related reading: Which Process Steps Improve the Stability of NTC Thermistors?)
 
 
3. Choose a product series whose voltage rating is equal to or higher than the maximum working voltage.
 
 
4. Using the maximum ambient temperature and the working current, refer to the temperature derating curve of the resettable fuse and pick the specification whose holding current fits.
 
 
5. Check the trip-time curve of the selected resettable fuse to confirm that its protection trip time meets the requirement.
 
 
6. Refer to the data in the datasheet and confirm that the dimensions of the chosen thermistor meet the design requirements. (Recommended reading: TVS Diode vs Varistor: Key Differences)
 
 
How is a thermistor selected? The steps above summarize how to choose a PTC thermistor. If anything is still unclear, please leave a message on the Contact Us page of our website and we will reply as soon as possible.

上一条:已经是第一条了!

下一条:自恢复保险丝为什么用高分子材料制作?