深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

How to Improve NTC Thermistor Stability

A process for improving the stability of NTC thermistor chips mainly involves the following steps:
 
 
Step 1, batching: conventional metal oxide powders are mixed uniformly in the required proportions;
 
 
Step 2, ball milling: the mixed powder is ball-milled together with water and a grinding medium until submicron particles are formed. (Related reading: What are the differences between polymer and ceramic thermistors and bimetal circuit breakers)
 
 
Step 3, drying and pre-pressing: the ball-milled powder is dried and pre-pressed in a die into billets of the required shape;
 
 
Step 4, isostatic pressing: the billets are placed in an isostatic pressing chamber and consolidated into thermistor chip blocks;
 
 
Step 5, first sintering: the thermistor chip blocks are heated from room temperature to 1,100 °C to 1,300 °C and held for 5 to 8 hours so that they are partly ceramicised, then cooled. (Related knowledge: What are the functions of PTC and NTC electronic components)
 
NTC thermistor chip
Thermistor
 
Step 6, dicing: the partly ceramicised thermistor chip blocks are cut into thin ceramic wafers of the specified thickness;
 
 
Step 7, second sintering: the thin ceramic wafers are heated from room temperature to 1,100 °C to 1,300 °C and held for 5 to 8 hours to be sintered into NTC thermistor ceramic chips
 
 
After ageing and stabilisation through the steps above, the finished NTC thermistors offer good stability and high consistency.
 
 
These are the steps for improving NTC thermistor stability that we have summarised above. If you are interested in NTC thermistors, please leave a message for us on the Contact Us page of our website and we will reply as soon as possible. (Recommended reading: What is a thermistor and how are thermistors classified)