A magnetic drive pump consists mainly of a pump head, a magnetic coupling (magnetic rotor), a motor and a mounting base plate. Because the motor does the work that keeps the whole unit running, the question arises whether a resettable fuse can be used to protect the motor in a magnetic pump.
Our engineers at Shenzhen Joincircuit Industrial Co., Ltd. answer: yes, it can.
In a magnetic pump, all you have to do is connect the resettable fuse in series with the motor supply line. Whenever the motor is overloaded or locks, the fuse protects it in time and the motor will not burn out. (Related reading: The Value of Resettable Fuses in Tablet Computers)
Magnetic drive pump
Under normal operation a resettable fuse has a very low resistance and does not affect the circuit. When the magnetic pump motor overloads or locks, the resulting high current drives the fuse from low resistance to high resistance, promptly limiting the current through the motor and delivering overcurrent protection for both motor and system. After the power is switched off or the fault is cleared, the fuse returns to low resistance by itself and the pump system resumes normal operation. Whether a leaded or an SMD resettable fuse is chosen, protection arrives in time.
The information above summarizes what is involved in applying resettable fuses to magnetic pumps. If anything else is unclear, contact our online sales staff or leave a message on our Contact Us page and we will reply as soon as possible.