深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

Temp/Humidity Controller Fuse Protection

A temperature and humidity controller is an instrument built around an advanced microcontroller as its control core and imported high-performance temperature and humidity sensors. It measures and controls temperature and humidity signals at the same time and displays them digitally on an LCD, and is widely used in high- and low-voltage switchgear, terminal boxes, box-type substations and many other types of cabinet.
 
 
A few days ago we received an email asking whether a resettable fuse can be used for overcurrent protection in a temperature and humidity controller. The answer is yes. Such a controller is essentially an electronic device, and its core still depends on a power supply, so overcurrent protection is essential.
 
 
Temperature and humidity controller
 
 
The resettable fuse can be mounted inside the transformer or on the control board, connected in series with the primary or the secondary of the transformer. Under normal operation it has low resistance. When the secondary is short-circuited, overloaded or overheated, the high current and high temperature switch the fuse to high resistance almost instantly, limiting the circuit current and protecting both the transformer and the controller circuit. When the power is removed or the fault is cleared it returns to low resistance by itself and the transformer resumes normal operation. (Recommended reading: Technical Terms for Positive Temperature Coefficient (PTC) Thermistors)
 
 
Using a resettable fuse in a temperature and humidity controller effectively prevents the failures and downtime caused by short circuits resulting from overcurrent or overvoltage. That is a summary of how resettable fuses apply to temperature and humidity controllers. If anything remains unclear, leave a message on our Contact Us page and we will reply as soon as possible.

上一条:已经是第一条了!

下一条:自恢复保险丝为什么用高分子材料制作?