深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

Resettable Fuse Performance Parameters

Conventional fuses are made of alloy: when the circuit is overloaded or shorted the fuse element melts quickly and protects the circuit. Their drawback is that they are single-use — once blown, they must be replaced.
 
 
Resettable fuses are made from a conductive polymer with a positive temperature coefficient. Under normal conditions the fuse is in a low-resistance state and the circuit works as designed. If the circuit is shorted or overloaded, the resistance of the fuse rises rapidly and limits the current to a sufficiently low value, providing overcurrent protection. Once the circuit is back to normal the fuse quickly returns on its own to its low-resistance conducting state without being replaced, which is why it is called a resettable fuse.
 
 
Compared with conventional fuses, PPTC resettable fuses have their own particular performance parameters. The main ones are described below to help you select a resettable fuse correctly.
 
 
(1) Holding current Ihold. The holding current is the maximum steady-state current a PPTC can pass without tripping. The higher the ambient temperature, the lower the holding current. For a PPTC used to protect a circuit, the holding current is normally higher than the operating current. (Related reading: Applications of resettable fuses on motherboards)
 
 
(2) Trip time Ttrip. The time from the onset of overcurrent until the PPTC has completed its trip. For a given PPTC, the higher the current through it, or the higher the ambient temperature, the shorter the trip time.
 
 
(3) Trip current Itrip. The minimum steady-state current that makes a PPTC trip within a specified time under stated ambient conditions. The higher the ambient temperature, the lower the trip current.
 
 
(4) Maximum current Imax. The maximum current at which a PPTC can trip safely under stated ambient conditions, that is, its current withstand rating. Above this value the PPTC may be damaged and may not recover.
 
 
(5) Maximum voltage Vmax. The highest voltage a PPTC can safely withstand while tripped under stated ambient conditions, that is, its voltage rating. Above this value the PPTC may be damaged and may not recover. The higher the ambient temperature, the lower the maximum working voltage. (Recommended reading: Protecting automotive electronic devices with fuses)
 
 
The points above are a brief introduction to the performance parameters of resettable fuses. If anything is still unclear, please leave a message on the Contact Us page of our website and we will reply as soon as possible.