深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

How Ceramic Discharge Tubes Protect Circuits

Technology advances year after year, and more and more people are enjoying what electronics bring to their lives; everyday life has seen substantial breakthroughs as well. In the past, rural households caught in thunderstorms would suffer damaged wiring, appliances ruined by improper use during storms, and sometimes even personal injury. Today this rarely happens. Why?
 
 
It is precisely because lightning protection devices exist. As the role of lightning, antistatic, overvoltage and overcurrent protection devices has come to be recognized, they have been applied on a large scale in real circuit protection. But how exactly does a lightning protection device, the ceramic discharge tube, act in circuit protection? Today we take you behind the scenes. (Related reading: Gas Discharge Tube Selection Guide)
 
 
As we all know, when lightning strikes a power line, the lightning current must be discharged into the ground through the line. Even if lightning does not strike the line, once a strike occurs the induced charges of opposite polarity on the conductor are released and flow along both directions of the line.
Ceramic gas discharge tube
 
 
These currents intrude into substations or strike electrical equipment through the line, building up an overvoltage on the equipment. When the overvoltage exceeds the rated lightning impulse withstand voltage of the equipment, the equipment is damaged. Connect a ceramic discharge tube in parallel with the circuit: when the voltage applied across its two electrodes reaches the level that breaks down the gas inside the tube, the tube starts to discharge, changing from high impedance to low impedance, shorting the surge voltage rapidly to almost zero and releasing the overcurrent into the ground, thereby protecting the downstream circuit.
 
 
Ceramic discharge tubes are commonly used as the first or first two stages of a multistage protection circuit, where they discharge transient lightning overcurrents and limit overvoltages. The tube protects the circuit by holding the voltage down to a low level. Ceramic discharge tubes are currently the most widely used lightning protection devices, providing effective protection against lightning surges on AC and DC power supplies and on all kinds of signal lines. (Recommended reading: Advantages and Disadvantages of Gas Discharge Tubes)
 
 
That is a brief explanation of how ceramic discharge tubes protect circuits. If anything remains unclear, please leave a message for us on the Contact Us page of our website and we will reply as soon as possible.