深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

How to Select Overcurrent Protection Devices

Overcurrent protection devices mainly include one-shot fuses, resettable fuses, fuse resistors and circuit breakers. The most important of them is the fuse.
 
 
Fuses are generally connected in series in a circuit and are required to have low resistance (and therefore low power dissipation). During normal operation a fuse is equivalent to a length of wire: it conducts current steadily for long periods. It must also withstand a certain amount of overload when the current fluctuates because of the power supply or external interference. Only when a large overload current occurs in the circuit (a fault or short circuit) does the fuse operate, interrupting the current to keep the circuit safe and to avoid the risk of the product burning out.
 
 
While a fuse is breaking a circuit, the circuit voltage causes an arc at the instant the fuse element melts, and a high-quality fuse should suppress this flashover as far as possible; after breaking the circuit, the fuse must be able to withstand the circuit voltage applied across its terminals. (Related reading: Operating Current Characteristics and Recovery of Resettable Fuses)
 
 
Damage from pulses progressively reduces the pulse withstand capability of a fuse, so a necessary safety margin has to be considered when selecting one. This safety margin refers to the total breaking (operating) time of the fuse, which is the sum of the pre-arcing time and the arcing time.
 
 
When selecting a fuse, therefore, pay attention to its melting characteristics and its rated current, which are the basic conditions; also consider the environment around the fuse during installation. A fuse melts only when it reaches its own melting energy value, and in a cold environment its melting time will change, which must be kept in mind during use. (Recommended reading: Application of Resettable Fuses in Small Motors and Home Appliances)
 
 
That covers the basics of selecting overcurrent protection devices. If anything remains unclear, please contact us through the Contact Us page on our website and we will reply as soon as possible.