深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

How Resettable Fuses Protect Security Systems

High-speed domes, bullet cameras and box cameras used in security systems are today the widely deployed products for residential, road, factory, garage and warehouse surveillance, and a typical installation combines several high-speed domes and cameras into a matrix system that is connected to DVRs, hard-disk video recorders and server hosts.
 
 
Both the network links that carry the video signals and the power supply are centrally managed. The power system usually takes a single switching power supply or a transformer-based power supply as the main source and splits out multiple 12 V or 24 V DC feeds to each high-speed dome and camera load, while video signals run from the central equipment to the cameras; one central point feeds many distributed loads over long-distance multi-channel links, which is the method generally used today. (Related reading: Tripping current characteristics and recovery behaviour of resettable fuses)
 
 
A system with these characteristics, however, has one fatal weakness: when lightning strikes the line of one camera or high-speed dome load, the surge current damages the shared signal-processing circuit and the power circuit.
 
 
High-speed domes and cameras are themselves system units built from many electronic components, and their quality, workmanship and the standards applied by different manufacturers all vary. As living standards rise and electronic equipment becomes more diverse, the electromagnetic environment around these systems has become very complex, and security systems frequently pick up stray electromagnetic waves, spike interference, lightning current, unstable voltage, spark interference, wiring short circuits, installation errors and more. Any one of these can damage the load on the security equipment, and in severe cases can cause a fire.
 
 
Several approaches exist. The earliest and most common was glass fuse elements: a glass fuse was fitted at the signal and power input, and a fault on any one channel would stop the whole system working. Later a glass fuse was fitted to each branch instead, so that when a load or cable on one channel short-circuits and its fuse blows, replacing that one glass fuse restores operation without affecting the rest of the system. (Related reading: Resettable PPTC fuses for input and output protection of LED drivers)
 
 
Security equipment
 
In practice, however, replacing fuses is not that simple. Frequent fuse replacement is inconvenient (it means work at height), and in most cases the fuse fitted is rated far above the normal requirement, so it only blows after the camera is badly damaged; by then the camera is ruined or scrap, and a new fuse will not bring it back.
 
 
In fact, glass fuses here only solve short-circuit and overcurrent protection; they do not properly handle lightning protection, overvoltage protection or overtemperature protection. To cover all of these, a resettable fuse can now be combined with a varistor to provide lightning, overvoltage, short-circuit, overcurrent and overtemperature protection at the same time.
 
 
A resettable fuse paired with a varistor protects the equipment before it is damaged and restores automatically once power is removed or the fault is cleared, with no replacement needed. When one channel fails, only its resettable fuse goes into the protective state and the other circuits keep working normally, cutting costs on several fronts at once. A large body of field evidence supports this, and using resettable fuses for overload protection of security high-speed domes and camera systems has become the best-accepted solution in the security industry. (Recommended reading: What are the advantages of resettable fuses)