Gas discharge tubes - what are they used for? Earlier articles have already covered some of the basics, and many readers have written in to ask about the applications of these devices, so we will answer that question here.
Gas discharge tubes are used mainly in the following areas:
1) Lightning protection for telephones, fax machines and other communications equipment: low current handling, high holdover voltage, no leakage current and high reliability.
2) Suppression circuits built from a gas discharge tube and a varistor: the varistor has one fatal weakness, namely an unstable leakage current. A poor-quality varistor, after some time in service, may heat up and rupture as that leakage current grows. The remedy is to put a gas discharge tube in series with the varistor, but this brings a drawback of its own: the response time becomes the sum of the response times of the individual devices. If the varistor responds in 25 ns and the gas discharge tube in 100 ns, then R2, G and R3 in Figure 4 respond in 150 ns; adding R1, a second varistor, brings the response time back to 25 ns. (Related reading: Advantages and Disadvantages of Gas Discharge Tubes)
3) Gas discharge tubes in co-ordinated surge protection systems: the surge protection needed by an automatic control system is usually built from two or three stages, each exploiting the characteristics of a different suppression device so as to achieve reliable protection. The gas discharge tube normally sits at the line input as the first-stage device, where it absorbs the heavy surge current.
The second stage uses a varistor, which responds more quickly, within microseconds. For highly sensitive electronic circuits a third stage, a TVS, can be added to respond to surge voltages within picoseconds. When a surge such as a lightning strike arrives, the TVS acts first and clamps the transient overvoltage to a precise level; if the surge current is large, the varistor then conducts and diverts part of it, the voltage across the pair rises and eventually triggers the gas discharge tube ahead of them, which dumps the heavy current to ground.
That is a brief overview of the main applications of gas discharge tubes. If anything is still unclear, leave us a message on our Contact Us page and we will get back to you promptly. (Recommended reading: Gas Discharge Tube Selection Guide)