深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

Breaking Capacity of One-Time Fuses

Resettable fuses and one-time fuses are among the most widely used protective devices in everyday applications, yet the breaking behaviour of a fuse has always been something of a puzzle in the industry, and many people are unsure what breaking capacity means for a one-time fuse. Today we will give a brief introduction to the breaking capacity of one-time fuses.
 
 
One-Time Fuses and breaking capacity — resettable fuses and one-time fuses ultimately serve the same purpose, overcurrent protection, and breaking capacity goes a long way towards deciding which fuse is chosen.
 
 
Breaking capacity is denoted by the symbol Ir; it is also called maximum breaking capacity, short-circuit breaking capacity or interrupting rating. It is the most important safety parameter of a fuse, because it states the maximum current the fuse can safely interrupt at a specified voltage.
 
 
When the current through a fuse is so large that the circuit is shorted, the fuse must still break the circuit safely without causing any damage. (Related reading: Differences Between One-Time Fuses and Resettable Fuses)
 
 
If the rated breaking current is exceeded, the fuse may shatter, explode or spray material, igniting or damaging nearby people and components - a serious safety hazard.
 
 
The breaking capacity of a fuse depends on its construction and the materials used. Low-breaking-capacity fuses mostly have glass bodies, whereas high-breaking-capacity fuses usually have ceramic bodies, many of them filled with pure granular quartz.
 
 
As a rule, whenever the protected system is connected directly to the supply input and the fuse is fitted in the supply input section, a high-breaking-capacity fuse must be used.
 
 
In most secondary circuits, especially where the voltage is below the supply voltage, a low-breaking-capacity fuse is fully adequate. (Recommended reading: Overcurrent Protection of a Remote-Controlled Clothes Drying Rack with a Resettable Fuse)
 
 
That is a brief introduction to the breaking capacity of one-time fuses. If you have any questions, please leave a message on our Contact Us page or consult our sales engineers directly, and we will reply as soon as possible.

上一条:已经是第一条了!

下一条:自恢复保险丝为什么用高分子材料制作?