Ceramic (glass) discharge tube selection guidelines——Discharge tubes are widely used in large-scale installations, yet knowledge about them is limited. Today we briefly explain the key points to consider when selecting ceramic (glass) discharge tubes.
GDT (Gas Discharge Tubes), i.e. ceramic gas discharge tubes. A GDT consists of two electrodes with a defined gap, sealed in a ceramic tube filled with an inert gas. Its electrical performance depends on the gas type, gas pressure, internal electrode structure and manufacturing process. GDTs can withstand surge currents of tens to hundreds of kiloamperes and have very low junction capacitance, so they are generally used for lightning protection in communication circuits. (Related knowledge: ceramic tube fuses)
SPG (Spark Gap Protectors), i.e. glass gas discharge tubes, also known as spark gap protectors or high-energy discharge tubes. Inside an SPG, chips made of different materials form the discharge micro-gap; the tube is filled with inert gas at a specified ratio and pressure and is sealed with a glass tube and Dumet wire. SPG electrical performance depends on gas type, gas pressure and internal electrode structure. SPGs offer small size, low cost and low junction capacitance, and are commonly used for lightning protection of communication lines.
Ceramic (glass) discharge tube selection guidelines——As the saying goes, know your opponent and know yourself, and you need not fear a hundred battles. Having covered the basic internal structure and operating principle of ceramic (glass) discharge tubes, you will find the following selection points easier to appreciate.
fuse
DC sparkover voltage: In application, the lower limit of the DC sparkover voltage of the tube should be higher than the maximum normal operating voltage of the line; otherwise normal circuit operation will be affected. (Related reading: glass tube fuses)
Impulse sparkover voltage: Make sure the impulse sparkover voltage of the device is lower than the highest transient voltage that the downstream protected circuit can withstand.
Nominal discharge current: Determine the surge current level the selected tube must withstand, based on the application and the surge current likely to occur in the line.
Follow current: A gas discharge tube cannot be used alone as the overvoltage protection device in higher-voltage active circuits. To ensure the tube extinguishes the arc properly, wherever follow current may occur, connect a current-limiting device such as a varistor or a resettable fuse in series with the tube. (Recommended reading: How ceramic discharge tubes protect circuits in lightning protection)
Ceramic (glass) discharge tube selection guidelines——That is a brief explanation of the points to consider when selecting ceramic (glass) discharge tubes. If anything remains unclear, or if you have a different view, leave a message on our Contact Us page and we will reply as soon as possible.