深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

How to Check Whether a Fuse Is Good or Bad

How to check whether a fuse is good or bad——Fuses are everywhere in daily life, and many fuse enthusiasts like to tinker with them. But how do you tell a good fuse from a bad one? Today we briefly explain how to check whether a fuse is good or bad.
 
 
Fuses are generally tested against the relevant standards: UL 248-14 for the North American market and IEC 60127 for the European market. Without professional test equipment it is very difficult to test every characteristic of a fuse. In most cases the time-current characteristic, i.e. the overload test, is checked to confirm that the clearing time falls within the range specified by the standard. (Related knowledge: PPTC resettable fuse manufacturers)
 
 
How to check whether a fuse is good or bad——There are therefore two main ways to judge a fuse: with a multimeter, or by observing how it behaves in the circuit.


fuse
 
 
Test the fuse with the resistance range of a multimeter: anything below 1 ohm is good; a reading of several tens of ohms or more means the fuse is bad. If you have no meter at home, you can use the following method, but take care for your safety: hold a voltage tester against the live wire of the socket to confirm it is live, then place one end of the fuse against the finger-contact end of the tester and touch the other end of the fuse with your hand. If the fuse is good, the tester should light up. (Recommended knowledge: SMD resettable fuse testing guide)
 
 
Fuse: when a circuit fails or behaves abnormally, the current keeps rising, and the rising current may damage important or expensive components in the circuit, or even burn out the circuit and start a fire. If a fuse is correctly installed in the circuit, it will melt and interrupt the current once the current rises abnormally to a certain level and temperature, thereby protecting the safe operation of the circuit.
 
 
How to check whether a fuse is good or bad——That is a brief explanation of how to check whether a fuse is good or bad. If anything is unclear or you have further questions, leave a message on our Contact Us page and we will reply as soon as possible. (Recommended reading: Resettable fuses in motors and small appliances)