深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

How to Choose Between a Fuse and a Resettable Fuse

Fuses and resettable fuses How do you choose between them? A fuse has always been regarded as a one-shot device: when an overload occurs, the fuse element melts once and provides overcurrent protection, after which the fuse has to be replaced. That is why the technical term for it is one-time fuse. The core of a conventional fuse is a length of wire; when the current is too high the wire is heated to its melting point, and once the wire melts the current in the circuit falls to zero.
 
 
A resettable fuse also responds to an excessive current, but it is a self-resetting device. A polymer-based component resets automatically once the overload has gone and can provide overcurrent protection many times over. When the conductive polymer is heated by an overload current its resistance rises, which limits the circuit current.
 
 
How to choose between a fuse and a resettable fuse is a matter of engineering judgement. In practice the choice is made case by case; neither type is inherently better than the other, it is simply a question of which one suits the actual conditions, so certain important factors have to be weighed in common applications. (Related reading: PPTC resettable fuse manufacturer in Shenzhen)
 
 
For example, many designs for computers, peripherals and portable devices (smartphones, tablets and so on) call for resettable fuses, because a resettable fuse resets itself. With a one-time fuse, every overcurrent event would mean a replacement, which users would not accept.
 
 
In other cases a fuse may be the better choice, because under fault conditions a fuse interrupts the current completely. That may be the preferred option where safety must come first or where damage to downstream circuitry has to be avoided. A fuse is also very useful for fault diagnosis, helping designers and users to trace the source of an overcurrent fault.
 
 
The choice of fuse therefore still has to be made according to the actual conditions of your product. We hope this article has given you a clearer understanding of fuses and resettable fuses. If anything remains unclear, please leave a message for us on the Contact Us page of our website and we will reply as soon as possible. (Recommended reading: Do resettable fuses have a polarity)