深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

How a Fuse Works Safely

How a Fuse Works Safely—circuit faults happen from time to time in daily life. When a circuit fails (for example, a short circuit), almost the entire input voltage is applied across the two terminals of the fuse. This produces a very large current, which can cause the fuse to keep conducting and never open, which is why the concept of breaking current arose.
 
 
IEC and UL place different requirements on breaking capacity. Take IEC 127 as an example: a low breaking capacity (LBC) fuse must be able to break 35 A, or 10 times the rated current, whichever is greater; a medium breaking capacity (EBC) fuse must safely break 150 A; and a high breaking capacity (HBC) fuse must safely break 1500 A.
 
 
Breaking capacity is the most important safety parameter of a fuse. When selecting a fuse, therefore, this characteristic should be considered carefully and verified by actual testing: the maximum short-circuit current that may occur must not exceed the rated breaking capacity of the fuse, so that when a fault occurs downstream and a large current flows, the fuse can safely interrupt the circuit without creating a safety hazard. (Related reading: What Is Breaking Capacity and What Does It Mean in Practice?)
 
 
How a fuse works safely—to make sure a fuse works safely in a circuit, the choice of fuse has to be made carefully. Fuse selection is often overlooked by engineers, who tend to select a fuse simply by current value or by referring to the specifications of similar products from other manufacturers, and then find that the current rating is far from what their design requires. This article covers some of the most important basic parameters and offers engineers a simple basis for selection.
 
 
We hope the above gives you a deeper understanding of fuses. If anything is still unclear, please leave a message on our Contact Us page and we will reply as soon as possible. (Recommended reading: How Fuse Materials Relate to Fuse Opening)