深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

What Does JA Before 2A on an SMD Fuse Mean

Earlier articles have explained the common parameter definitions of SMD fuses, and many readers left us messages saying they had learned a lot and that our articles had given them a deeper understanding of SMD fuses. One of them asked: what does the JA in front of 2A on an SMD fuse mean?
 
 
So, since some readers are still not clear about this, let me explain it briefly here today.
 
 
SMD fuses normally leave the factory with a marking, and the fuse types made by each company carry their own marking so that they can be told apart. Take the SMD resettable fuse from Shenzhen Joincircuit Industrial Co., Ltd. as an example.

SMD fuse


SMD fuse
 
J185 is a marking used on SMD fuses: J stands for a Joincircuit product, and 185 is the type number, short for type ASDM2920-185 and easy to recognize. In the same way, the JA in front of 2A on an SMD fuse is a marking.
 
 
Different companies use different marking schemes. A marking on the part is not only a company identifier but also a difference in type, and the part may be marked with its current, its voltage or its size code. Naming rules vary from company to company and cannot be generalized, but the general approach is the same: to make the part easy to recognize. (Recommended reading: common parameter definitions of SMD fuses)


  
What Does the JA Before 2A on an SMD Fuse Mean - JA is the marking of our SMD fuse 1206-025, indicating that the part is a Joincircuit SMD fuse of type 1206-025. If you have any other questions, please contact our online sales staff and we will give you the most satisfactory answer.
 
 
That is a brief explanation of what the JA in front of 2A on an SMD fuse means. If anything is still unclear, please leave a message for us on our Contact Us page and we will reply as soon as possible.

上一条:已经是第一条了!

下一条:自恢复保险丝为什么用高分子材料制作?