深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

How to Select a Fuse | Selection Principles

How to Select a Fuse | Selection Principles - in earlier articles we covered how to identify fuses | common fuse knowledge, which we hope has given you a basic understanding of fuses. Many people are still not clear about how to select a fuse or what the selection principles are, so Shenzhen Joincircuit Industrial Co., Ltd. will explain briefly today how a fuse should be selected and what the selection principles are.
 
 
Fuse selection principle: the rated current of the fuse should be equal to or slightly greater than the maximum normal operating current in the circuit. Selecting a fuse involves the following factors.
 
 
A. Normal operating current: when running at 25°C, the current rating of a fuse usually has to be derated by 25% to avoid nuisance blowing. Most conventional fuses are made from materials with a relatively low melting temperature, so such a fuse is sensitive to changes in ambient temperature. For example, a fuse rated at 10A should normally not carry more than 7.5A at an ambient temperature of 25°C.
 
 
B. The voltage applied to the fuse: how the voltage in the circuit around the fuse affects it, and the voltage drop the fuse accounts for in the whole circuit. (Related reading: What Is the Relationship Between Rated Current and Operating Current)
 
 
C. The abnormal current at which the fuse must open: the maximum current at which the fuse still provides protection, and how the fault current of the product is determined.
 
 
D. The shortest and longest time an abnormal current may persist: how long a fault current lasts in the circuit.
 
 
E. The ambient temperature of the fuse: the circuit environment in which the fuse sits.
 
 
F. Pulses, impulse currents, surge currents, inrush currents and circuit transients.
 
 
G. Whether there are special requirements beyond the fuse specification: any extra requirement placed on the fuse.
 
 
H. Dimensional limits of the mounting arrangement: where the fuse is used, and whether there are size restrictions on installation. (Recommended reading: How to Install a Household Fuse Correctly and What to Watch Out For)
 
 
I. Required agency approvals: whether the product is required to carry various certifications in use.
 
 
J. Fuse hardware: fuse clips, mounting blocks, panel-mount holders and so on.
 
 
How to Select a Fuse | Selection Principles - that is a brief explanation of how to select a fuse and of the related selection principles. If anything is still unclear, please leave a message for us on our Contact Us page and we will reply as soon as possible.