深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

Resettable Fuses as Overcurrent Protection Devices: A Brief Guide

In an earlier article we explained the meaning of the resettable fuse parameters in detail, and we trust that readers now have a fairly clear understanding of these parameters. Today we continue with a brief guide to resettable fuses as overcurrent protection devices.
 
 
An overcurrent protection component, the resettable fuse, is connected in series in the circuit, and its working principle must be understood. During normal operation the temperature of the thermistor is close to room temperature and its resistance is very small, so connecting it in series does not impede the current. When a fault produces an overcurrent, the higher power dissipation raises the temperature of the fuse and its resistance becomes very large in an instant, limiting the circuit current to below a safe value; almost all of the circuit voltage then appears across the fuse, so the other components are protected.
 
 
After the circuit is switched off manually and the fault is cleared, the resistance of the resettable fuse returns quickly to its original level; once the fault is removed the resettable fuse can be used again without replacement.
 
 
A resettable fuse does not age easily by itself. The so-called ageing of a resettable fuse refers to how tightly the metal electrodes at both ends are bonded to the resettable fuse material. (Related reading: overcurrent protection solutions with resettable fuses)
 
 
Resettable fuses are manufactured under tightly controlled rolling processes, which guarantees that their performance does not degrade after 1000 hours in the harsh environment of 85 °C and 85% relative humidity. After many operations the resistance of a resettable fuse becomes higher than its initial value; once the resistance exceeds the maximum trip parameter R1max, the failure mode is that the manufacturer can no longer guarantee that the device will not trip at the hold current Ihold.
 
 
That is a brief explanation of resettable fuses. If anything remains unclear or you have other questions, please leave a message for us on the contact page and we will reply as soon as possible.
 

上一条:已经是第一条了!

下一条:自恢复保险丝为什么用高分子材料制作?