深圳市集电通实业有限公司

电话 : 0755-8830-8258

邮编 : 518129

邮箱 : andyzheng@jdtfuse.com

网址 : http://www.joincircuit.com/

Application Guidelines for Resettable Fuses

In an earlier article we explained how resettable fuses can be used for lightning and surge protection. Many readers still have questions about the applications of resettable fuses, so today we will expand on the subject.
 
 
Resettable fuses are available in two package options, radial-leaded and surface-mount, and their function suits a wide range of design applications.
 
 
“Plug-and-play” applications include motherboards and the many peripherals that are connected to and disconnected from computer ports frequently. Mice, keyboards, audio, network and monitor devices and anything connected through a USB port can fail, cables can be damaged, and connections can be made incorrectly. A function that resets the circuit once the incorrect connection has been corrected is therefore especially attractive. Some of these applications use radial-leaded parts, while others are better served by surface-mount parts.
 
 
When a power supply fails and produces an overvoltage that in turn causes overcurrent, a resettable fuse can protect the hard-disk drive from damage. Hard-disk drive applications usually use surface-mount resettable fuses. (Related reading: Resettable fuses in chemical batteries)
 
 
Power supplies are easily damaged by circuit faults. Without protection, the current a power supply delivers can create a low-resistance fault. Where several loads or several circuits are present, a separate resettable fuse can protect each load. The device is usually placed in the output circuit and may be supplied in a radial-leaded or a surface-mount package.
 
 
The high temperature produced by overcurrent in a motor damages the winding insulation, and in small motors it can even cause the very fine winding wire to fail. A resettable fuse will normally not trip at the normal starting current. Motors are generally protected with radial-leaded resettable fuses.
 
 
A transformer can be damaged by overcurrent arising from a circuit fault, and the current-limiting action of a resettable fuse protects it. Placing the resettable fuse on the load side of the transformer keeps the effect of a circuit fault to a minimum. Many applications use radial-leaded or surface-mount parts. (Recommended reading: Selecting an SMD resettable fuse)
 
 
That is as far as this article goes. Engineers who would like more detail on any of the points above are welcome to contact us online, and we will continue to answer your questions carefully and fully.

上一条:已经是第一条了!

下一条:自恢复保险丝为什么用高分子材料制作?