深圳市集电通实业有限公司
电话 : 0755-8830-8258
邮编 : 518129
邮箱 : andyzheng@jdtfuse.com
网址 : http://www.joincircuit.com/
How to Make Better Use of Fuses
In an earlier article we mentioned how fast-acting and time-lag fuses are told apart, and what a fuse does in a circuit, and many readers came away with a deeper understanding of fuses. Even so, some questions about using them remain, so today we will explain briefly how to make better use of a fuse.
The fuse is the most basic component in a power supply and one of the most important where safety is concerned. When the power supply works abnormally the fuse melts automatically, safeguarding the product and personal safety. Choosing the right fuse is therefore important. A suitable fuse protects the product and the people using it while never melting during normal operation and causing the product to fail. To use a fuse well, its basic characteristics have to be understood.
How to make better use of a fuse —— As is well known, a fuse is also called a fusible cut-out, and IEC 127 defines it as a fuse element. It is normally connected in series in the circuit, and its purpose is to protect certain important components, or to prevent a circuit from burning up when it works abnormally.
When the circuit works normally the fuse is no more than a piece of wire and can work stably for a long time. When the current fluctuates because of the power supply or of external interference, the fuse still withstands overload within a certain range. Only when a large overload current appears in the circuit, such as a fault or a short circuit, does the fuse melt by itself once the current has risen abnormally to a certain level for a certain time, cutting off the current and keeping the circuit operating safely.
The earliest fuse was invented by Edison more than a hundred years ago to protect the expensive incandescent lamps of the day. Fuses are now made of a silver-copper alloy with a fairly high resistivity and a comparatively low melting point. The lead-antimony alloy fuses used originally have been phased out for safety reasons. (Related reading: How a Fuse Works)
How to make better use of a fuse —— A fuse works because it has a certain resistance of its own, so heat is produced when current flows through it. At the normal load current or at an allowed overload current, the heat produced is dissipated by radiation, convection and conduction and an equilibrium is reached. When heat cannot be dissipated as fast as it is produced, it accumulates in the fuse element and raises its temperature; once the temperature exceeds the melting point of the element, the element melts, the current is broken and the circuit is protected.
A fuse generally consists of three parts. 1. The fuse element, the core of the fuse, which breaks the current when the fuse operates. 2. The electrodes, usually two of them; they are what connects the element to the circuit, so they must conduct well and their contact resistance should be as small as possible. 3. The support. The element of a fuse is usually fine and flexible, and the support holds it in place and makes the three parts a rigid whole that is easy to mount and use; it must have good mechanical strength, insulation, heat resistance and flame retardancy, and must not break, deform, burn or short-circuit in service.
How to make better use of a fuse —— Besides the structure described above, some fuses have other special devices. Fuses used in power circuits and high-power equipment, for example, have an arc-extinguishing device, because the circuits they protect not only carry a large operating current but also have a high voltage across the fuse element when it melts. The element may already have melted or even vaporised while the current is still not cut off, because at the instant of melting the voltage and the current draw an arc between the two electrodes of the fuse. (Recommended reading: Resettable fuse protection in a no-smoking alarm)
This arc-extinguishing device must have high insulation, good thermal conductivity and an electronegative character. Quartz sand is the material commonly used. Some fuses also have a blown-fuse indicator, whose purpose is to change the appearance of the fuse once it has operated (melted) so that this is easy to notice, for example by lighting up, changing colour or ejecting a solid indicator.
How to make better use of a fuse —— That is our brief explanation of how to make better use of a fuse. If anything remains unclear, please leave us a message on the Contact Us page and we will reply as soon as possible.