深圳市集电通实业有限公司
电话 : 0755-8830-8258
邮编 : 518129
邮箱 : andyzheng@jdtfuse.com
网址 : http://www.joincircuit.com/
How to Select a Fuse
In an earlier article we explained how a fuse works safely, and most readers will already have a reasonably clear picture. Choosing a fuse, however, still confuses many people, so we have put together the following notes on how to select a fuse.
The choice of a fuse normally follows a simple procedure:
1. Safety certification: the certification required for the fuse follows that required for the complete appliance, for example UL or IEC specifications.
2. Size and construction: the dimensions follow the space available in the circuit design, for example length, diameter and whether leads are fitted.
3. Rated voltage: it must be equal to or greater than the actual applied voltage; common values are 24V, 32V, 63V, 125V and 250V.
4. Breaking capacity: it should be greater than the maximum fault current in the circuit.
0603 SMD fuse
5. Rated current: it is set with reference to the following points. (1) Normal operating current: at an ambient temperature of 25°C the rated current of a UL fuse should be ≥ normal operating current / 0.75, and that of an IEC fuse ≥ normal operating current / 0.9.
(2) Ambient temperature: the current-carrying capacity of a fuse is tested at an ambient temperature of 25°C. The higher the ambient temperature, the shorter the life of the fuse and the lower its current-carrying capacity, so ambient temperature must be taken into account when selecting a fuse.
(3) Pulses: a pulse produces thermal cycling and mechanical fatigue that shortens the life of the fuse. The design should ensure that the pulse I2T, allowing for the pulse factor, is less than the nominal melting I2T of the fuse: rated I2T of the fuse > actual pulse I2T / Pf, where Pf is the pulse factor, which differs according to the number of pulses the fuse must withstand.
6. Testing: samples chosen by the procedure above must be tested in the actual circuit to verify that the selected fuse is suitable. This verification should cover both normal and fault conditions, so as to confirm that the fuse protects the circuit it is fitted to.
The above is a brief outline of the fuse selection procedure. If anything remains unclear, please refer to the article How to Select a Fuse Correctly, after which you should have a clearer understanding of how to select a fuse.