深圳市集电通实业有限公司
电话 : 0755-8830-8258
邮编 : 518129
邮箱 : andyzheng@jdtfuse.com
网址 : http://www.joincircuit.com/
Fuse Breaking Capacity and Melting Capacity
Fuse breaking capacity | melting capacity — a reader posting as “roboit” emailed us: I keep seeing breaking capacity listed under fuses and have no idea what it means, so could you explain it?
A specialist at Shenzhen Joincircuit Industrial Co., Ltd. replies: the breaking capacity of a fuse is the time required to open at a current above its rating. Breaking capacity and melting characteristics — breaking capacity is the maximum safe short-circuit current a fuse can carry at its rated voltage; the melting characteristic is the overload test of the fuse, which requires the fuse to open within the range laid down in the standard during the overload test. For example, in the US standard ((UL248-1 & 14)) the overload test at twice the rated current requires the fuse to open within 60 seconds. (Related reading: What is breaking capacity and what does it mean in practice?)
Fuse breaking capacity | melting capacity — when a current between the conventional non-fusing current and the current of the rated breaking capacity specified in the relevant standard is applied to a fuse, the fuse must operate satisfactorily without endangering its surroundings. The prospective fault current of the circuit in which the fuse is installed must be lower than the rated breaking capacity current specified in the standard; otherwise, when a fault occurs and the fuse opens, persistent arcing, ignition, destruction of the fuse, melting of the fuse together with its contacts, and illegible fuse markings may result. Poor-quality fuses whose breaking capacity falls short of the standard cause the same hazards in service.
From the definitions above it is clear that the breaking capacity of a fuse is the maximum safe short-circuit current it can withstand at its rated voltage, and that both the melting characteristic and the breaking capacity of a fuse matter a great deal. Melting capacity and breaking capacity, however, are not the same: breaking capacity is an important criterion for judging whether a fuse is good, while melting capacity is a different criterion, and the two should not be confused. (Recommended reading: Recommended fuse manufacturers)
Fuse breaking capacity | melting capacity — the above is a brief introduction to fuse breaking capacity. If anything remains unclear, leave a message for us on the Contact Us page and we will reply as soon as possible.