Shenzhen JDT Fuse Industrial Co.,Ltd

Phone : 0755-8830-8258

Postcode : 518129

E-Mail : andyzheng@jdtfuse.com

URL : http://www.joincircuit.com/

Encapsulation Process of PPTC Resettable Fuses

The encapsulation process for a resettable fuse has a direct bearing on device performance, so it has to be controlled carefully. Research into how the encapsulant influences the thermal behaviour of the fuse led to modified epoxy resin being chosen as the encapsulating material for polyethylene / carbon-black PPTC devices.
 
 
When the through current is small, a fuse cured at 120 °C (the melting point of polyethylene) has voids between the encapsulant and the core. Heat dissipation from the core degrades, while the core can still expand freely, so the trip time shortens. Once the current is large enough, the encapsulant has almost no effect on trip time. Encapsulation should therefore be carried out at the temperature at which the core reaches its maximum thermal expansion.
 
 
Shenzhen Joincircuit Industrial Co., Ltd. controls the encapsulating resin, cure temperature and dwell time as part of the production process, so that trip behaviour stays consistent from lot to lot.