Shenzhen JDT Fuse Industrial Co.,Ltd
Phone : 0755-8830-8258
Postcode : 518129
E-Mail : andyzheng@jdtfuse.com
URL : http://www.joincircuit.com/
What Is the Difference Between CQC and CCC on Fuses
Fuses usually carry the CQC and CCC marks, and other electronic products bear these two marks as well. What is the difference between them?
Simply put, CCC is a mandatory product certification, also known as 3C. Products listed in the mandatory catalogue must be certified; otherwise they may not be produced or sold. CQC stands for China Quality Certification Centre, and CQC certification is a voluntary certification in China, based on the principle of voluntariness.
So what exactly do these two marks on a fuse mean? All fuses listed in the “Catalogue of Products Subject to Mandatory Certification (2010 updated version)” issued by the CNCA must obtain CCC mandatory certification. For small electronic fuses, any fuse manufactured in accordance with the three national standards “GB9364.1”, “GB9364.2” and “GB9364.3” (commonly known as the CCC standards) must obtain CCC certification before it can be produced, sold or used. (Related reading: Common Overcurrent Protection Measures)
The CNCA has also issued the “Announcement on Mandatory Product Certification Bodies (No. 35 of 2012)”. CCC mandatory certification of fuses must be carried out by a qualified testing body recognised by CNCA and CQC in accordance with the requirements of the mandatory certification standards; the product must pass the conformity tests and a factory inspection before a CCC certificate can be obtained. A CCC certificate is currently valid for five years; if continued use is required after expiry, application must be made within 90 days before expiry, and a factory surveillance inspection must be passed every year during the validity period.
Not all small fuses used on the market can be covered by the three CCC standards above, and a large proportion of fuses are not manufactured to the CCC standards. Such fuses cannot obtain CCC mandatory certification and can only apply for CQC voluntary certification. For small electronic fuses, products whose main parameters basically comply with national standards (GB) or international standards (IEC) can apply for voluntary certification, and voluntary certification is as valid as mandatory certification within China.
The acceptance of applications, allocation of testing bodies (the applicant may also choose its own), review of test reports and issue of certificates for both CCC mandatory certification and CQC voluntary certification are all handled by the China Quality Certification Centre (CQC). Samples may be submitted and tested through an accredited testing laboratory, the test report must be reviewed and accepted by CQC, and certificates are numbered and issued centrally by CQC. On the CQC website, all CCC and CQC certificates can be looked up by applicant name, manufacturer name or certificate number. (Related reading: The Difference Between VDE and UL Certification for Fuses)
China is a member of the IEC and a member of the CB Scheme, so CCC or CQC certification can be exchanged for certification in other member countries. If a CB report is applied for together with CCC or CQC certification, two reports can be obtained from a single test: the CCC or CQC report is used to obtain the CCC or CQC certificate, while the CB report is used to apply for conversion into certification in other CB member countries.
For a fuse, a safety component that provides protective safeguarding for the circuit, the relevant safety certifications are extremely important and are a necessary basis for fuse selection; only fuses with safety certification can be used with confidence. All products manufactured by Shenzhen Joincircuit Industrial Co., Ltd. have passed the relevant international and domestic safety certifications. Making every fuse well is our responsibility and our mission. (Recommended reading: UL Certificate for One-Time Fuses)