Shenzhen JDT Fuse Industrial Co.,Ltd

Phone : 0755-8830-8258

Postcode : 518129

E-Mail : andyzheng@jdtfuse.com

URL : http://www.joincircuit.com/

How a Resettable Fuse Works

How a Resettable Fuse Works — In everyday life resettable fuses are everywhere. They are commonly used for overcurrent, overload and overtemperature protection on air-conditioner control boards. In summer in particular, when air conditioners are used far more often, a good resettable fuse proves its worth and makes a professionally designed product safer and more reliable. So what exactly is the working principle of a resettable fuse and how does it actually work?
 
 
A resettable fuse is manufactured from high-tech polymer resin and nano-scale conductive particles through a special process. Under normal conditions the nano conductive crystals link with the resin matrix to form chain-like conductive paths, and the fuse works normally; when a short circuit or an overload occurs in the circuit, the large current flowing through the fuse raises its temperature, and once the Curie temperature is reached the density of states drops rapidly and the phase transition grows, so the internal conductive paths either avalanche and shift or break apart. The fuse then jumps to a high-resistance state and the current is cut off at once. (Related reading: SMD resettable fuse manufacturer in Shenzhen)
 
 
This limits and protects the circuit quickly and accurately. The small residual current keeps the fuse in its protected state; once power is removed and the fault is cleared its temperature falls, the density of states rises again and the phase transition reverses, so the nano crystals rebuild the chain-like conductive paths and the resettable fuse returns to normal operation without any manual replacement.

Resettable fuse
 
 
How a Resettable Fuse Works — A resettable fuse exists to provide overcurrent protection in a circuit. Any circuit built around precision instruments will include a fuse to keep those instruments safe. Yet if the fuse had to be replaced by hand every time such equipment was used frequently, that would hardly be practical, and this is where the resettable fuse comes in. It restores the circuit current automatically, so nobody has to change a fuse manually, and working efficiency rises considerably.
 
 
Overcurrent protection refers to the fact that most electronic equipment has a rated current which must not be exceeded, or the equipment will burn out; before a critical instrument is destroyed, some electronic device interrupts the fault current and thereby protects it. The device that interrupts the current in this process is usually a fuse, but an ordinary fuse is good for one operation only. With a resettable fuse, the equipment in such a circuit can be used again and again for trial work. (Related reading: Shenzhen SMD resettable fuse wholesale)
 
 
Giving the circuit overcurrent protection with a resettable fuse, without damaging the instruments themselves, makes the equipment reassuring to use. This function is not unique to resettable fuses — certain thermistors can do it as well — but those devices respond far more slowly than a resettable fuse. In a circuit with precision instruments, a thermistor would let the fault current burn out the instrument before it could interrupt the circuit.
 
 
How a Resettable Fuse Works — This overcurrent protection has made resettable fuses very popular in the market. Because such a fuse is simple in structure and easy to use, it is gradually replacing the traditional one-shot fuse and becoming the mainstream choice. (Recommended reading: Resettable fuse performance parameters)