Everyone in the industry knows that the main difference between fast-acting and time-lag fuses lies in I2t. Many people find the I2t value hard to read; put simply, it describes how much transient pulse current a fuse can withstand. In other words, a time-lag fuse rides through the inrush current that occurs at power-on and power-off without opening, so the equipment keeps working normally.
For this reason, time-lag fuses are also called surge-tolerant fuses. Technically, a time-lag fuse has a larger melting energy value (I2t), so more energy is needed to open it; for fuses with the same rated current, a time-lag type therefore withstands pulses far better than a fast-acting one. (Related reading: How to Choose an SMD Fuse)
Because a time-lag fuse has a higher I2t than a fast-acting fuse of the same rating, it opens somewhat more slowly when an overcurrent occurs in the circuit. Some may therefore wonder whether the protection performance of a time-lag fuse is inferior. Shenzhen Joincircuit Industrial Co., Ltd. can tell you that it is not.
Once a circuit fault occurs, the overcurrent does not disappear by itself, and the energy of a sustained overcurrent will far exceed the I2t of the fuse. Whatever the fuse type, it will open; the time difference between time-lag and fast-acting types hardly matters for the protection requirement, and only where sensitive components in the protected circuit need protection does the time-lag characteristic affect protection performance.
Because of these differences, time-lag and fast-acting fuses are used in different circuits, and the choice should follow the needs of the circuit. For example, purely resistive circuits (with no or very little surge) and circuits that must protect sensitive, expensive components such as ICs require fast-acting fuses, whereas capacitive or inductive circuits (which have inrush at power-on and power-off) and power supply input/output stages are best protected by time-lag fuses.
Apart from circuits that protect ICs, most applications using fast-acting fuses can switch to time-lag fuses to improve immunity to interference. The reverse swap, replacing a time-lag fuse with a fast-acting one, often makes the fuse open as soon as the equipment is switched on, so it cannot work normally.
In addition, in terms of price, time-lag SMD fuses cost considerably more than fast-acting ones, so cost is also an indirect factor in a customer's choice. (Recommended reading: Operating Principle of Resettable Fuses)