Shenzhen JDT Fuse Industrial Co.,Ltd

Phone : 0755-8830-8258

Postcode : 518129

E-Mail : andyzheng@jdtfuse.com

URL : http://www.joincircuit.com/

What a Resistor Does

A resistor, as the name suggests, is a component that possesses resistance. In fuse engineering the technical way to put it is that every material offers some opposition to the current flowing through it, and that opposition is called resistance. A component whose physical property is this lumped resistance is called a resistor, usually shortened to resistance and given the symbol R. We also know that a resistor exists to put resistance to work, so what does that really mean? Let us go through it.
 
 
This property of resistance holds a special place in radio engineering: because a resistor absorbs electrical energy, it lets the energy in a circuit be shared out among the components as required.
 
 
Low-power resistors are usually carbon film types sealed in a plastic case, while high-power resistors are usually wirewound, made by winding a high-resistivity metal wire onto a ceramic core.
 
 
If a resistor has a value close to zero ohms, for example a heavy-gauge wire between two points, it offers no opposition to current, the circuit containing it is effectively shorted and the current is unlimited. (Related reading: Resistor basics)
 
 
If a resistor has an infinite or very large resistance, the circuit containing it can be regarded as open and the current is zero. Resistors used in industry sit between these two extremes: they have a finite resistance and pass a finite current, but the current is nothing like as large as it would be in a short circuit.
 
 
The current-limiting action of a resistor is like fitting a narrow pipe between two large-diameter pipes to restrict the water flow. Resistance, abbreviated R, is a basic property of a conductor and depends on its dimensions, material and temperature. Ohm's law gives I = V/R, hence R = V/I. The unit of resistance is the ohm, written with the Greek letter “Ω” and defined as the resistance across which one volt drives a current of one ampere.
 
 
The main job of a resistor is to oppose the flow of current. Strictly speaking, “resistance” names a property, whereas the resistor found in electronic products is the component itself. When an engineer asks for “a 100 ohm resistor”, the request is for a resistor whose “resistance value” is 100 ohms. Resistance values are also commonly quoted in kilohms (kΩ) and megohms (MΩ).
 
 
We hope this overview has given you a reasonable picture of resistors and the questions around them. If you would like to know more, leave a message on this site and we will come back to you as soon as we see it, or talk to our online sales team; reading the other articles here works too. (Recommended reading: technical terms for PTC positive temperature coefficient thermistors)